Table of Contents
Advertisement
4.5.2
Add manually
For commissioning you are located in:
Overview of commissioning:
Fig. 33: Main menu: Device Management
Use the following steps to add devices manually:
1. Connect a PC with system controller "Smart Access Point" and call up system controller
"Smart Access Point" via a browser.
2. Start the "Device Management" function in the main menu of system controller "Smart
Access Point".
3. Select add devices.
–
All located devices are displayed.
4. Enter the following data:
Device type
■
Addressing
■
Serial number
■
System Manual 2CKA000073B9795
Commissioning
Setion 2 (Adding devices in the system)
– Section B: (Adding devices)
see chapter 4.1 "Overview of commissioning"
on page 30
│51
Advertisement
Table of Contents
