4.5.3
Adding via automatic search
For commissioning you are located in:
Overview of commissioning:
Fig. 34: Main menu: Start search
Use the following steps to search for devices automatically:
1. Connect a PC with system controller "Smart Access Point" and call up system controller
"Smart Access Point" via a browser.
2. Start the "Add manually" function in the main menu of system controller "Smart Access
Point".
3. Start the search.
–
All located devices are displayed.
System Manual 2CKA000073B9795
Commissioning
Setion 2 (Adding devices in the system)
– Section B: (Adding devices)
see chapter 4.1 "Overview of commissioning"
on page 30
│52