9.5.2
Arming the device manually
Please follow the steps below:
[1] On the "Alarm" screen, tap the designated icon to carry out an arming action (e.g. "Arm all").
[2] Enter the password (a user password or a program password can be used).
■
If a user password is used to arm the device, only this user password can be used to disarm
it.
■
If a program password is used to arm the device, both the user password and the program
password can be used to disarm it.
[3] Tap "OK".
Product manual 2TMD041800D0002
Operation
│228