Ip Touch 7" And Guard Unit - ABB Welcome IP System Manual

4.2.2

IP touch 7" and Guard unit

For commissioning you are located in:
Overview of commissioning:
First address stations IP touch 7" or Guard unit. Addressing is carried out in the same way for
all versions.
Fig. 16: Addressing station IP touch 7" or Guard unit
The wizard is displayed after the device has booted up automatically and will guide you through
the first setup. If the device has already been setup, the main menu is displayed directly.
To address the device, perform the following steps:
1. Follow the steps of the wizard for the first commissioning.
2. Enter the address of the device in the technical menu.
Station IP touch 7" or Guard unit is addressed.
Do not switch station IP touch 7" or Guard unit off or separate them from the other devices.
System Manual 2CKA000073B9795
Commissioning
Section 1 (Preparing the devices)
see chapter 4.1 "Overview of commissioning"
on page 30
│34