Table of Contents
Advertisement
[1] System controller Smart Access Point
The management software is installed on the Smart Access Point. The management software is
operated via the indoor station.
Overview of the versions of the system controller Smart Access Point
Control ABB-Welcome IP
(Door communication)
Control Busch-
VideoControl (Video
surveillance)
Control Busch-
AccessControl
(Access control)
Control for up to 700
apartments
Control for up to 700 to
2000 apartments
Table 5: Overview of system controller versions
*
Availability upon request
More than 700 apartments
If more than 700 apartments have to be managed via the system controller, a
very high computing performance is required.
–
–
[2] IP actuator H8304
The "IP actuator" carries out the switching commands. The setting is made via the management
software.
The "IP actuator" has the following main functions:
Connection of door openers or light switches.
■
Up to 2 blockages of connections.
■
The switching duration of the lock release or the activation of the lighting can be set.
■
DIN rail mounting
■
Firmware can be updated via the management software
■
Power supply via PoE or separate power supply adapter
■
System Manual 2CKA000073B9795
Smart Access Point
Lite
D04012
●
●
―
●
―
In this case, install the management software on a PC, for example, and use
it as a system controller.
The PC version of the management software is available separately on a
USB stick.
Overview of product range
Smart Access Point
Pro
D04011
●
●
●
●
―
(Availability upon request)
PC version *
(Management
software)
(see note)
●
―
―
―
●
│13
Advertisement
Table of Contents
