Model W1856 (For Machines Mfd. Since 02/19)
Assembly
Before beginning the assembly process, refer to Items.
Needed.for.Setup and gather everything you need.
Ensure all parts have been properly cleaned of any
heavy-duty rust-preventative applied at the factory (if
applicable). Be sure to complete all steps in the assembly
procedure prior to performing the Test.Run.or connecting
the machine to power.
To.assemble.machine,.do.these.steps:
1.. Attach handle to quill handwheel with shoulder
screw, then tighten screw (see Figure.10).
2. Attach tool holder to back of bed using (2) pre-
attached M5-.8 x 12 button head cap screws (see
Figure.11).
Figure.10. Handle attached to quill
Figure.11. Tool holder attached to bed.
-15-
Quill
Handwheel
Handle
Shoulder
Screw
handwheel.
x 2