Table of Contents
Advertisement
Unpacking
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Needed.for.Setup
The following are needed to complete the setup process,
but are not included with your machine.
Description.
Additional People ...............................................1
Safety Glasses ............................... 1 Pair Per Person
Cleaner/Degreaser .................................. As Needed
Disposable Shop Rags ............................... As Needed
Flat-Head Screwdriver .........................................1
Inventory
The following is a list of items shipped with your machine.
Before beginning setup, lay these items out and inventory
them.
Note: If you cannot find an item on this list, carefully
check around/inside the machine and packaging materials.
Often, these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.
Box.Inventory.(Figure.6).
A. Knockout Rod ...............................................1
B. Spanner Wrench 32mm ...................................1
C. Hex Wrenches 3, 5mm ...............................1 ea.
D. Tool Holder .................................................1
E. Handwheel Handle w/Shoulder Screw .................1
F.
Spur Center MT#2 .........................................1
G. Live Center MT#2 ..........................................1
Model W1856 (For Machines Mfd. Since 02/19)
SETUP
Keep. machine. disconnected. from.
power.until.instructed.otherwise.
Qty
F
Qty
Figure.6. Inventory components.
-12-
A
B
G
E
D
C
Advertisement
Table of Contents
