General Cleaning Instructions; Clean Foot Part; Storage; Waste Disposal/Environmental Protection - FLORABEST FTS 1100 D4 Translation Of The Original Instructions

Submersible dirty water pump
Hide thumbs Also See for FTS 1100 D4:
Table of Contents

Advertisement

Available languages

Available languages

G B
I E
N I
Pull out the power plug before eve-
a risk of electrocution or of injury
from moving parts.
General cleaning
instructions
In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every
use.
In case of stationary installation, the
to be checked regularly (at the latest
every three months).
present in the pump casing.
Regularly remove sludge from the pit
base and also clean the shaft walls.
switch with clear water.
In the case of a long period of non-
use, the pump must be thoroughly
cleaned after the last use and before
up can arise due to precipitation and
residues.
1 2
CY
7) is

Clean foot part

Always remove the mains plug be-
fore working on the device.
Moving parts create the risk of elec-
trocution or injury.
Dirt on the bottom of the pump can be was-
hed down with clear water.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.

Storage

Keep the equipment clean, dry and out
of the reach of children.
Unscrew the bracket adapter (
for storage.
Waste Disposal/Envi-
ronmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
Do not dispose of electrical appli-
ances as unsorted municipal waste,
use separate collection facilities.
Hand over the device at an utilization loca-
can be separated out and thus recycled
use can be implemented. Ask our Service-
Center for details.
Defective units returned to us will be dis-
posed of for free.
10)

Advertisement

Table of Contents
loading

Table of Contents