To Change The Flash Time; To Change The System Pin - Motorola O2 Manual

U D
4. Scroll or
If you choose
U
•
Scroll or
U
•
Scroll or
press Select.
n
5. Press to return to standby mode.
9.5

To change the flash time

Flash is useful to access certain network services and PABX/switchboard
services.
The default flash time preset in the phone is suitable for your country network
and therefore you should not need to change it.
Note
The use of the phone cannot be guaranteed on all PABX.
1. Press Menu, scroll
D
Set Base
2. Scroll to
D
Flash Time
3. Scroll to
U D
4. Scroll or
n
5. Press to return to standby mode.
9.6

To change the System PIN

The System PIN is required when changing certain settings and for registration
/ de-registration. The default setting is 0000. You can change this to your own
preferred number (up to 8 digits).
When you enter a PIN, the digits are shown as ********.
Press Menu, scroll
1.
D
2. Scroll to Set Base
D
System PIN
3. Scroll to
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
n
7. Press to return to standby mode.
Note
It is advisable to make a note of your new PIN code and keep it somewhere
safe.
Base settings
All Handsets
to or
Select Handset, all available handsets are displayed.
D
to the handset you want then press Select.
D
to the number of rings that you want to set: 2, 4 or 6 and
D
to Settings
and press Select.
and press Select.
to Flash 1 or Flash 2
D
Settings
to
and press Select.
and press Select.
Select Handset then press Select.
and press Select.
then press Select
and press Select.
to confirm.
37