5. Press
, scroll the left and right navigation keys to select a volume level
E
(1 - 5 and Ringer Off).
6. Press the left
menu.
9.6.2
Flash time
Depending on your country and network operator, your phone has the flash
time set to Long. It is unlikely that you need to change this setting unless
advised to do so.
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
9.6.3
Dial mode
Your phone is set to tone dialing. You should only need to change this if
connected to an older type of switchboard / PBX which requires pulse dialing.
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
9.6.4
Area code
The area code must be 3 digits long.
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
9.6.5
PBX code
If you are connected to a switchboard, you may be required to enter a PBX
code (e.g. '9') before you dial the number. Your phone will automatically add
this code in front of each number you dial.
1.
Press the left
2. Press the left
3. Press the left
4. Press the left
5. Press the left
Settings
key to confirm or right
C
key. Scroll
to
U
C
key, scroll
to select
E
C
key, scroll
to select
E
C
key, press
or
U
C
key to confirm.
C
key, scroll
to
U
C
key, scroll
to select
E
C
key, scroll
to select
E
C
key. Then press
C
key to confirm.
C
key, scroll
to
U
C
key, scroll
to select
E
C
key, scroll
to select
E
C
key, enter or edit the area code.
C
key to confirm.
C
key, scroll
to
U
C
key, scroll
to select
E
C
key, scroll
to select
E
C
key, enter the code.
C
key to confirm.
C
key to return to the previous
C
Settings.
Base
settings.
Flash
time.
Short, Medium
to select
E
Settings.
Base
settings.
Dial
mode.
or
to select
U
E
Settings.
Base
settings.
Area
code.
Settings.
Base
settings.
PBX
code.
or Long.
Tone
or Pulse.
41