Noise interference on your radio or television
•
Your base or charger cradle may be too close. Move it as far away as
possible.
Answering machine does not record messages
•
Switch the answering machine on.
•
The memory may be full. If so, you will need to delete some messages.
•
Answer mode may have been set to Answer Only. Change the mode to
ANSWER & REC.
Cannot access messages remotely
•
Remote access may be switched off.
•
Check that you are using the correct PIN code. If wrong PIN is entered, a
beep is played. You can enter the PIN once again.
Cannot record outgoing message
•
Answering machine stops recording
•
The memory may be full. If so, you will need to delete some messages.
•
The maximum message length is 3 minutes.
48
Help