Using the Projection TV Menus
Using the Audio Menu
To change from one Effect to
another, use the
button on the
inside panel of the remote
To change from one MTS
Mode to another, use the
MTS/SAP button on the remote
To select the Audio menu
Move the joystick V or v to highlight
the Audio icon
Move the joystick V or v to scroll
through the options.
to select an option. That
option's settings appear.
Use the joystick to scroll through the settings.
to select the desired setting.
to exit the menu screen.
To restore the factory default settings for Treble, Bass, and Balance
on the remote control when in the Audio menu.
The Audio menu includes the following options:
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Select for surround sound (for stereo
Adds a surround-like effect to mono
programs (requires optional rear speakers).
Normal stereo or mono reception.
Select for stereo reception when viewing a
program broadcast in stereo.
Select to automatically switch the projection
TV to second audio programs when a signal
is received. (If no SAP signal is present, the
projection TV remains in Stereo mode.)
Select for mono reception. (Use to reduce
noise during weak stereo broadcasts.)