Using the Projection TV Features
Setting the Clock
You can also access the
Timer through the Setup menu.
For details, see page 66.
Move the joystick V and v to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press
confirm each setting and move to the next setting. Press
back to the previous setting.
After you've set the channel number, press
settings. The settings are displayed in the Timer screen and the
Timer is set to
The projection TV is now set to turn on, tune to the channel you've
set, and then turn off at the times you set for that Timer. The Timer
indicator on the front panel indicates the Timer is set.
To turn a Timer setting on or off
step 3 (page 49).
To change a Timer setting
Set the timer (
To set a second Timer setting
Set the other unset timer (
If you didn't set the clock during the projection TV's initial setup (see
page 35), you need to set it before you can set either of the Timers.
The Timer Setup screen appears (as shown on page 49).
Move the joystick V or v to highlight
Move the joystick V and v to set the current day and time (hour,
minute, and AM/PM). Press
each setting and move to the next setting. Move the joystick
go back to the previous setting.
When you finish setting the day and time, press
) again. The old timer setting is
Set the Clock
or move the joystick
to save the Timer
, then press
to save the