Projection TV Controls and Connectors
Front Panel
1
2
3
4
5
i.LINK
6
7
Control
1 POWER
2 STANDBY/
i.LINK STANDBY
3 TIMER
4 MENU
5
i.LINK
6 B bVv
SELECT
7
8 TV/VIDEO
9 -CHANNEL+
0 -VOLUME+
qa FLASH FOCUS
To access the front buttons and input jacks on the projection TV, push
in to release the door on the front of the projection TV.
POWER
STAND BY/
i.LINK STAND BY
TIMER
8
TV/VIDEO
VOLUME
CHANNEL
MENU
+
+
9
FLASH FOCUS
–
–
q;
qa
Description
Press to turn on and off the projection TV.
When lit in orange, indicates that i.LINK Standby is On. When lit in red,
indicates that i.LINK Standby is Off. For details, see page 66.
When lit, indicates one of the timers is set. For details, see page 49.
Press to display the projection TV on-screen menu. Press again to exit from
the menus. For details, see page 51.
Press to display the i.LINK Control Panel. For details on using the i.LINK
Control Panel, see page 48.
Press B bVv to move the on-screen cursor and press SELECT to select.
Press to select the on-screen highlighted item.
Press repeatedly to step through the video equipment connected to your
projection TV's video inputs.
Press to scan through channels.
Press to adjust the volume.
Press to adjust the convergence (see page 36).
Setting Up the Projection TV
Push to open
13