Rear Panel - Sony KDP 57XBR2 Operating Instructions Manual

Rear Panel

1
3
4
5
Connection
1 VHF/UHF
2 CABLE
3 S VIDEO IN 1/3/4
4 VIDEO IN 1/3/4
VIDEO/L(MONO)-AUDIO-R
5 SELECT OUT
6 HD/DVD IN
(1080i/720p/480p/480i)
VIDEO IN 5/6
7 CONTROL S
IN/OUT
8 DIGITAL AUDIO (OPTICAL)
OUT PCM/DOLBY DIGITAL
2 6
8
9
q;
7
Description
Connects to your VHF/UHF antenna. VHF/UHF is the digital TV antenna input.
Connects to your cable source.
Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped
video component. Provides better picture quality than the VHF/UHF jacks or
the Video IN jack.
Connect to the audio and video OUT jacks on your VCR or other video
component. A 6th video input (VIDEO 2) is located on the front panel of the
projection TV. The Audio and Video IN jacks provide better picture quality
than the VHF/UHF IN jack.
Connect to the audio and video IN jacks on your VCR or other video
component. The output signal is determined by the SELECT OUT setting in the
Setup menu (see page 65).
Connect to your DVD player's or digital set-top box's component video (Y, P
P ) and audio (L/R) jacks.
R
Allows the projection TV to receive (IN) and send (OUT) remote control
signals to other Sony infrared-controlled audio or video components.
Connect to the optical audio input of an audio component that is Dolby Digital
and PCM compatible.
Setting Up the Projection TV
DIGITAL
AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
1
2
L L
qa
R R
SUB WOOFER
OUT
qs
AUDIO OUT
FIX VAR
L
qd
R
,
B

             
15