Download  Print this page

Connecting A Satellite Receiver With A Vcr - Sony KDP 57XBR2 Operating Instructions Manual

Digital high definition projection tv.
Hide thumbs

Advertisement

Setting Up the Projection TV

Connecting a Satellite Receiver with a VCR

TV
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
24
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Connect the CATV cable to the VCR's VHF/UHF IN jack.
3
Using a coaxial cable, connect the VCR's OUT jack to the
projection TV's CABLE jack.
4
Using an A/V cable, connect the satellite receiver's Audio and
Video OUT jacks to the VCR's Audio and Video IN jacks.
5
Using an A/V cable, connect the VCR's Audio and Video OUT
jacks to the projection TV's Audio and Video IN jacks.
6
If necessary, change the video input on your VCR. (For details,
see your VCR's instruction guide.)
Coaxial
cable
A/V cable
If the peripherals you are connecting have S VIDEO jacks, you can use S VIDEO
cables for improved picture quality (compared to combination audio/video
cables). Because S VIDEO cables carry only the video signal, you will also need
audio cables for sound.
CATV
cable
Satellite receiver
VCR
Satellite
antenna
cable

Advertisement

Table of Contents

   Related Manuals for Sony KDP 57XBR2

This manual is also suitable for:

Kdp-65xbr2

Comments to this Manuals

Symbols: 0
Latest comments: