Sony KDP 57XBR2 Operating Instructions Manual page 69

Option Description
Channel Allows you to customize the channel list that appears
Skip/Add when using the CH+/- buttons on the remote control. The
projection TV maintains separate channel lists for digital
and analog channels.
Digital
Analog
1
Move the joystick V or v to scroll through the
channels until you find the channel you want to
skip/add.
2
Press
3
Move the joystick V or v to toggle between
and
4
Move the joystick B to return to the Channel
Setup menu, or press
Channel Logo
Allows you to assign logos to channel numbers.
Channel List
To assign a logo for a channel number:
1
Move the joystick V or v to highlight the
channel number to which you want to assign a
logo. Then press
number.
2
Move the joystick B bVv to highlight one of the
logos. Then press
selected channel number.
3
Move the joystick B to return to the Channel
Setup menu, or press
Digital Signal
Displays the strength of the terrestrial digital broadcast
Strength signal, to help you adjust your antenna to optimize signal
reception. When the TV is receiving a good signal (the
signal is locked and there are no errors in the signal), the
green light appears. Adjust the antenna
until the green light appears.
Using the Projection TV Menus
Select to add or skip digital channels.
Select to add or skip analog channels.
to select it.
. Then press to select.
Skip
EXIT
Select to display the channel list.
to select that channel
to assign that logo to the
EXIT
Add
to exit the menus.
to exit the menus.
59