Using the Audio Menu
A virtual surround
system attempts to create
the same surround effect
produced by a
multichannel system using
only the left and right
speakers. Most effective
for programs encoded in
To select the Audio Menu
1 1 1 1
2 2 2 2
Move the joystick to the
3 3 3 3
Use the joystick to scroll
through the options.
4 4 4 4
to select an option.
That option's settings appear.
5 5 5 5
Use the joystick to scroll through the settings.
6 6 6 6
to select the desired setting.
7 7 7 7
to exit the menu screen.
To restore the factory default settings for Treble, Bass and Balance
on the remote control when in the Audio menu.
The Audio menu includes the following options:
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Select to stabilize the volume.
Select to turn off Steady Sound.
Select for surround sound (for stereo programs
Adds a surround-like effect to mono programs.
Normal stereo or mono reception.
Select for stereo reception when viewing a program
broadcast in stereo.
Select to automatically switch the projection TV to
second audio programs when a signal is received.
(If no SAP signal is present, the projection TV
remains in Stereo mode.)
Select for mono reception. (Use to reduce noise
during weak stereo broadcasts.)
Using the Menus