Setting Up the Projection TV
Connecting Two VCRs for Tape Editing
The SELECT OUT jacks allow you use a second VCR to record a
program being played by the primary VCR to edit and dub tapes.
Using an A/V cable, connect the playback VCR's Audio and
Video OUT jacks to the projection TV's Audio and Video IN
Using an A/V cable, connect the recording VCR's Audio and
Video IN jacks to the projection TV's SELECT OUT jacks.
If necessary, change the video input on your VCR. (For details,
see your VCR's instruction guide.)
To do tape editing
You can select the output signal from the SELECT OUT jacks in the Setup menu.
For details, see page 65.
on the remote control to select the playback VCR.