Introducing the Projection TV
The following table describes the buttons on the remote control's
outside and inside panels.
3 PIC MODE
5 WIDE MODE
Press to mute the sound. Press again or press VOL+ to
restore the sound.
Press repeatedly until the projection TV displays the time
in minutes (15, 30, 45, 60, or 90) that you want the
projection TV to remain on before shutting off
automatically. Cancel by pressing until Sleep Off appears.
While the Sleep feature is set, press once to view
Press repeatedly to step through the video picture modes:
Vivid, Standard, Movie, Game, Pro. Also available in the Video
menu. For details, see page 52.
Press to change between the VHF/UHF input and the
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. Also available in the Screen
Mode menu. For details, see pages 43 and 56.
Use with 0 – 9 and ENTER buttons to select subchannels
(for example, 2.1). For details on selecting subchannels,
see page 38.
Press to display the i.LINK Control Panel. There is also an
i.LINK button on the front panel of the projection TV (see
page 13). For details on using the i.LINK Control Panel,
see page 48.
Press to display the Scrolling Channel Index. For details,
see page 39.
Press to display the projection TV on-screen menu. Press
again to exit from the menus. For details, see page 51.
Press to adjust the volume.
Move the joystick B bVv to move the on-screen cursor. To
select an item, press the center of the joystick (
Press to add the current channel to the Favorite Channels
list. For details, see page 40.
Press once to display the channel number, channel label
(if set), time, and other information. When the DTV is
receiving a digital signal with Dolby Digital, the decoding
type is displayed (Dolby Digital or Dolby Digital Pro
Logic). Press again to turn Display off.
Press to freeze the window picture. Press again to restore
the picture. For details, see page 47.