Table of Contents
Advertisement
Controller Modules Supported
The following VMEbus disk/tape controller modules are supported by the
172Bug. The default address for each controller type is First Address. The
controller can be addressed by First CLUN during execution of the
, or
BO
IOP
TRAP #15 calls. Note that if another controller of the same type is used,
the second one must have its address changed by its onboard jumpers
and/or switches, so that it matches Second Address and can be called up by
Second CLUN.
Controller Type
CISC Embedded Controller
MVME320 - Winchester/Floppy
Controller
MVME323 - ESDI Winchester
Controller
MVME327A - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME350 - Streaming Tape
Controller
:
Notes
1. If an MVME172P4 with an SCSI port is used, the MVME172P4 module has CLUN 0.
2. For MVME172P4s, the first MVME320 has CLUN $11; the second MVME320 has CLUN $12.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DDisk/Tape Controller
commands, or during execution of the .DSKRD or .DSKWR
First
First
CLUN
Address
$00 (Note 1)
$11 (Note 2)
$FFFFB000
$08
$FFFFA000
$02
$FFFFA600
$06
$FFFF9000
$16
$FFFF4800
$18
$FFFF7000
$04
$FFFF5000
Data
Second
Second
CLUN
Address
--
--
$12 (Note 2)
$FFFFAC00
$09
$FFFFA200
$03
$FFFFA700
$07
$FFFF9800
$17
$FFFF5800
$19
$FFFF7800
$05
$FFFF5100
D
,
BH
--
D-1
Advertisement
Table of Contents
