Table of Contents
Advertisement
Summary of Changes
This is the second edition of MVME172P4 Installation and Use. It
supersedes the September 2000 edition and incorporates the following
updates.
Date
Description of Change
October 2000 In the description of the snoop control switch on page 1-18, entries in the table
concerning boards equipped with the MC68060 processor have been corrected.
October 2000 Several jumper drawings and configuration descriptions in Chapters 1 and 2
have been updated to reflect the current board layout and shipping
configuration.
October 2000 In the descriptions of the MC2 and MCECC DRAM size switches on pages
1-15
and 1-21, the importance of executing env;d after modifying switch
settings has been emphasized.
Overview of Contents
Chapter 1, Hardware Preparation and
instructions, hardware preparation guidelines, and installation instructions
for the MVME172P4 VME Embedded Controller.
Chapter 2, Startup and
the MVME172P4 VME Embedded Controller after its installation in a
system and describes the functionality of the switches, status indicators,
and I/O ports.
Chapter 3, 172Bug
architecture, describes the monitor (interactive command portion of the
firmware) in detail, and gives information on using the debugger and
special commands.
Chapter 4, Functional
Embedded Controller on a block diagram level.
Chapter 5, Pin
various groups of interconnect signals on the MVME172P4.
xvi
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installation, provides unpacking
Operation, provides information on powering up
Firmware, describes the basics of 172Bug and its
Description, describes the MVME172P4 VME
Assignments, summarizes the pin assignments for the
Advertisement
Table of Contents
