4.4
Setting the pressure sensor inputs
h Select the input on which the pressure Sensor is connected to.
Sensor input 1 with add-on module:
Sensor input 1 without add-on module SVP:
Sensor input 2 with add-on module:
Sensor input 2 without add-on module SVP:
Figure 51:
h Click on „Continue"
h Set the scaling of the „Pressure actual value".
Figure 52:
h Click on „Continue"
Guided commissioning: Sensor input
Guided commissioning: Scaling pressure actual value
Application handbook Servo pump function V1 for BM5000
Guided Commissioning
SVP, analog input
Standard-IO X6, analog input
SVP, analog input
Standard-IO X6, analog input
Document No.: 5.17002.02
4
3
1
4
2
47
of 76