Switching Pressure Sensors; 2.11 Maximum Positive Speed - Baumuller b maXX 5000 Application Handbook

Servo pump function

Hide thumbs Also See for b maXX 5000:

Table of Contents

2.10

Switching pressure sensors

2.10 Switching pressure sensors

The servo pump software of the BM5000 has the functionality to switch between two pres-

sure sensors for pressure control. 

If the used sensors have different pressure ranges, also scaling parameters must be

adapted (dataset switch recommended).

Bit 7 in Control word 1 (ZP177.3–)

m False:

m True:

The default used pressure sensor has to be connected to analog input 4 of add-on mod-

ule SVP or analog input 2 of standard module X6.

A second pressure sensor has to be connected at analog input 3 of add-on module SVP

or analog input 1 of standard module X6.

If the value is set to 0 rpm, the pump only rotates in an anticlockwise direction.

For quicker depressurization it may be necessary for the pump to rotate briefly in the other

(clockwise) direction.

The maximum permissible (clockwise) speed must be calculated based on the pump

manufacturer's documentation.

Application handbook Servo pump function V1 for BM5000

Document No.: 5.17002.02

of 76

Pressure control using sensor 2

Pressure control using sensor 1

Baumüller Nürnberg GmbH

Table of Contents

Show Quick Links

Table of Contents