3.2
Reading in of pressure and volume set/actual values
3.2.3
Field bus combined with standard analog IO X6
In this case the pressure and volume set value is set via field bus parameter:
m Volume set value interface:
ZP177.42–
Pressure set value interface :
ZP177.20–
The pressure actual value can only be read in at analog input 1 or 2 of connector X6 range
0 - 10 V.
Figure 20:
NOTE!
In this configuration no add-on module SVP is necessary.
24
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02
of 76
Q Set value field bus
P set value field bus
Pressure
sensor
Field bus combined with standard analog IO X6
DINT
Scaling: ml/min
DINT
Scaling: mBar
Baumüller Nürnberg GmbH