Pin Assignment Field Bus Combined With Svp-001-00X - Baumuller b maXX 5000 Application Handbook

Pin assignment
Figure 19:
Depending on the used add-on module SVP the following signal forms are required:
m Pressure actual value interface (analog input 3 or 4 of add-on module SVP):
SVP-001-001 Voltage input (0-10 V)
Pressure sensor with voltage output (0-10 V) is required.
SVP-001-002/3 Current input (0/4 - 20 mA)
Pressure sensor with current output (0/4 - 20 mA) is required.
NOTE!
add-on module SVP-001-00X requires an own 24 V-supply.

Pin assignment field bus combined with SVP-001-00X





Application handbook Servo pump function V1 for BM5000
Installation
Document No.: 5.17002.02
3
23
of 76