Reading In Of Pressure And Volume Set/Actual Values; Add-On Module Svp As Analog Interface; Svp As Analog Interface - Baumuller b maXX 5000 Application Handbook

3.2

Reading in of pressure and volume set/actual values

3.2 Reading in of pressure and volume set/actual values
It is possible to switch the interface using the bit numbers 8 and 9 in
to the following table:
ZP177.3–
11
01
10
3.2.1

Add-on module SVP as analog interface

In this case the volume set value is set using analog module SVP-001-00X in slot B of the
b maXX controller.
The set pressure value and actual value are also provided via analog module SVP-001-
00X in slot B of the b maXX controller.
The pressure actual value can be read in from 0/4 - 20 mA or 0 - 10 V.
Figure 16:
20
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02
of 76
= XXXX XXXX XXXX XXXX
| Add-on module SVP as analog interface (see
| Field bus combined with add-on module SVP (see
| Field bus combined with standard analog IO X6 (see
Pressure
sensor

SVP as analog interface

ZP177.3–
Zpage 20–)
Zpage 22–)
Zpage 24–)
Baumüller Nürnberg GmbH
according