Add-On Module Svp - Baumuller b maXX 5000 Application Handbook

3.3

Add-on module SVP

3.3 Add-on module SVP
The add-on module SVP provides an I/O-extension. The add-on module SVP has to be
mounted in production, it's not pluggable or can be retrofitted.
Up to now there are three types of add-on module SVP.
Module with additional analog/digital inputs/outputs,
Types
Version
SVP-001-001
BM53XX-XXXX-XX04
SVP-001-002
BM53XX-XXXX-XX05
SVP-001-003
BM53XX-XXXX-XX06
The add-on module is required at servo pump systems with
m Analog set value interface or
m Pressure sensor with current interface or
m High precision applications
Digital inputs/outputs
Evaluation:
Input current (per input):
Time delay input:
Level:
Output current of each output:
Electrical isolation:
Short circuit proof:
Analog outputs
Resolution
Output voltage
Output current max.
Updating rate
Short circuit proof
26
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02
of 76
Analog in 1 / 2 Analog in 3 / 4
Analog voltage Analog voltage inputs
inputs ±10 V ±10 V
resolution 14 bit resolution 14 bit
Analog voltage Analog current inputs
inputs ±10 V (0) 4...20 mA
resolution 14 bit resolution 14 bit
Analog current inputs Analog current inputs
(0) 4...20 mA (0) 4...20 mA
resolution 14 bit resolution 14 bit
edges, programmable
2 mA digital input
max. 4 ms,
Low (0 ... 5 V); High (12 ... 28 V)
max. 500 mA
optocoupler
current limited, switch-off via temperature
12 bit
-10 V to +10 V
1 mA
125 µs
limited, max. 10 s
BM53XX-XXXX-XX04
BM53XX-XXXX-XX05
BM53XX-XXXX-XX06
Analog out 1 ... 4 Digital in 1 ... 4
Digital out 1 ... 4
4 analog 4 digital inputs
voltage outputs 24 V /
±10V 4 digital outputs
24 V
resolution 12 bit
Baumüller Nürnberg GmbH