Movi-Plc ® Basic Dhp11B Controller - SEW-Eurodrive MOVIDRIVE MDX61B System Manual

Technical data of options
4
MOVI-PLC® basic DHP11B controller
4.26 MOVI‑PLC
4.26.1 Part numbers
4.26.2 Description
4.26.3 Electronics data
®
MOVI‑PLC basic DHP11B option
Status displays
Fieldbus
System bus
Engineering
Panel operation
Connection technology
Digital inputs/outputs
Memory
Tools for startup
130
System Manual – MOVIDRIVE
®
basic DHP11B controller
®
The MOVI-PLC basic controller DHP11B.. is available in 3 versions, which differ in
the modules available from a range of libraries.
Part num- MOVI-PLC
ber P11B device design
18204724 DHP11B-T0
18208223 DHP11B-T1
18208231 DHP11B-T2
®
MOVI-PLC is a series of controllers available from SEW‑EURODRIVE. MOVI-PLC
can be programmed by users according to IEC 61131-3 and PLCopen.
®
The MOVI-PLC basic controller DHP11B is equipped with a PROFIBUS DP-V1 slave
interface, two SBus interfaces (CAN), RS485 and eight digital inputs/outputs, five of
which are interrupt-capable. MOVI-PLC
®
same time (MOVIDRIVE
LEDs for the voltage supply to the I/Os, firmware, program, PROFIBUS, system bus
• PROFIBUS DP and DP-V1 acc. to IEC 61158
• Automatic detection of baud rate from 9.6 kbaud to 12 Mbaud
• Bus connection implemented with suitable connector
• GSD file SEW_6007.GSD
• DP ID number 6007
• Maximum 32 process data
• 2 system buses (CAN) to control 12 inverters and CANopen I/O modules
• CAN layer 2 (SCOM cyclic, acyclic) or via the SEW MOVILINK
• Baud rate: 125 kBaud – 1 MBaud
• External bus terminator
• Address range: 0 – 127
Via RS485, PROFIBUS and the system buses
via RS485
• PROFIBUS: 9-pole D-sub connector according to IEC 61158
• System buses and I/Os: Plug-in terminals
• RS485: RJ10
• 8 I/Os to IEC 61131-2; can be configured as inputs or outputs. Five are interrupt-
capable
• Program: 512 kByte
• Data: 128 kB
• Retain: 24 kB
MOVITOOLS
(programming languages IL, ST, LD, FBD, CFC, SFC; libraries for optimized inverter
control)
®
MDX60B/61B
®
basic DH- Description
MOVI‑PLC
Application version I (in addition to version
T0, enables additional functions including
electronic cam and synchronous operation)
Application version II (in addition to version
T1, enables additional functions including
handling)
®
basic DHP11B can control 12 devices at the
®
B/compact, MOVITRAC
(24579 )
hex dec
®
MotionStudio with integrated PLC Editor
®
basic controller
®
B, MOVIAXIS , MOVIMOT
®
protocol
controller DHP11B basic MOVI-PLC®
®
®
).