Movi-Plc® Basic Dhp11B.. Controller Option - SEW-Eurodrive MOVIDRIVE MDX61B System Manual

®
2.40 MOVI-PLC basic DHP11B.. controller option
Part numbers The MOVI-PLC
modules available from a range of libraries.
Part number
1820 472 4
1820 822 3
1820 823 1
Description MOVI-PLC
can be programmed by users according to IEC 61131-3 and PLCopen.
The MOVI-PLC
interface, two SBus interfaces (CAN), RS485 and eight digital inputs/outputs, five of
which are interrupt-capable. MOVI-PLC
same time (MOVIDRIVE
Electronics data
®
MOVI-PLC basic DHP11B.. option
Status displays
Fieldbus
System bus
Engineering
Panel operation
Connection technology
Binary inputs / outputs
Memory
Tools for startup
11886AXX
System Manual – MOVIDRIVE® MDX60B/61B Inverter
Technical Data and Dimension Sheets
MOVI-PLC® basic DHP11B.. controller option
®
basic controller DHP11B.. is available in 3 versions, which differ in the
®
MOVI-PLC basic DHP11B..
unit version
DHP11B-T0
DHP11B-T1
DHP11B-T2
®
is a series of controllers available from SEW-EURODRIVE. MOVI-PLC
®
basic controller DHP11B.. is equipped with a PROFIBUS DP-V1 slave
®
B/compact, MOVITRAC
LEDs for the voltage supply to the I/Os, firmware, program, PROFIBUS, System
buses
• PROFIBUS DP and DP-V1 to IEC 61158
• Automatic detection of baud rate from 9.6 kbaud to 12 Mbaud
• Bus termination with suitable connector to implement
• GSD file SEW_6007.GSD
• DP ident. number 6007
• Maximum 32 process data
• 2 system buses (CAN) for control of 12 inverters and CANopen I/O modules
• CAN layer 2 (SCOM cyclic, acyclic) or via the SEW MOVILINK
• Baud rate: 125 kBaud ... 1 MBaud
• External bus terminator
• Address range: 0 ... 127
Via RS485, PROFIBUS and the system buses
Via RS485 and CAN 2 (in preparation)
• PROFIBUS: 9-pin Sub-D connector to IEC61158
• System buses and I/Os: plug-in terminals
• RS485: RJ10
• 8 I/Os to IEC 61131-2; can be configured as inputs or outputs. Five are interrupt-
capable
• Program: 512 kByte
• Data: 128 kByte
• Retain: 24 kByte
®
MOVITOOLS MotionStudio with integrated PLC editor
(Programming languages IL, ST, LD, FBD, CFC, SFC; libraries to optimize control of
the inverters)
Description
®
MOVI-PLC basic controller
Application version I (in addition to version T0, enables
additional functions including electronic cam and
synchronous operation)
Application version II (in addition to version T1, enables
additional functions including handling)
®
basic DHP11B.. can control 12 units at the
®
07/B, MOVIAXIS
(24579 )
hex dec
n
kVA
2
f
i
Hz
P
®
® ®
, MOVIMOT ).
10
11
12
13
®
protocol
14
15
16
17
18
19
20
21
22
105
1
2
3
4
5
6
7
8
9