BOCK practico alu plus Assembly And Operation Manual page 28

If the mounting latches for the end panels
are not yet mounted, slide them into the lon-
gitudinal bars of the lying surface, and attach
them from below with the enclosed
threaded rods.
Now, attach the mattress brackets using the
supplied self-tapping screws, if these were
not factory-installed (depending on shipping
method of the nursing care bed).
Subsequently, raise the chassis for the fur-
ther assembly.
Actuate the central parking brake to prevent
an unintentional movement of the bed.
Bolt the end panels and the lying surface to-
gether.
28