ROBBE Arcus II Series Instruction And User's Manual page 9

Assembly
2. Wings
1
Picture 1:
Loosen the locking screw on the underside of the wing
and push the wing onto the carbon fibre tube until it
stops.
4
Pictures 4 and 5:
Slide the wing into the recess in the fuselage. Carefully pull the connecting cable through the recess in the middle of the
fuselage to the front of the fuselage.
I N S T R U C T I O N S A N D U S E R M A N U A L
2
1
Picture 2:
Secure the wing on the carbon tube by tightening the
screw on the underside of the wing. Tighten the screw
with feeling, but firmly.
5
3
Picture 3:
ass the aileron servo cable under the carbon fiber tube.
6
Picture 6:
Place the second wing on the carbon fibre tube and slide
it into the recess on the fuselage. Insert the servo cable
under the carbon fiber tube and pull it carefully through
the recess to the front into the fuselage.
9