Explanation Of Technical Terms - ROBBE Arcus II Series Instruction And User's Manual

Explanation of technical terms

Engine speed ("throttle")
This controls the speed of the drive motor.
Lower stick = Motor off
Stick up = highest speed
Rudder
This controls the flight attitude of the model around the vertical axis.
Stick left = model flies to the left (rudder moves to the left)
Stick right = model flies to the right (rudder moves to the right)
Ailerons
This controls the flight attitude of the model around the longitudinal axis.
Left stick = left wing lowers
(left aileron moves up, right aileron moves down)
Right stick = right aileron lowers
(right aileron moves up, left aileron moves down)
Elevator
This controls the flight attitude of the model around the transverse axis.
Stick down, the model climbs (the elevator rises)
Stick up = the model descents (the elevator goes down)
C.G. = Center of Gravity
Servo Reverse
Reversing the direction of the servos
Dual Rate
Switchable travel reduction or extension for rudders
(fixed wing models) or inclination angle (multicopter)
Binden
Assignment of the transmitter / receiver to each other
I N S T R U C T I O N S A N D U S E R M A N U A L
Longitudinal axis
Transverse axis
Vertical axis
5