Operation Settings - GE PANDA Service Manual

4.1.4 Operation Settings

This menu enables users to customize the behavior of alarms, user functions, and displayed units by setting
default values for the parameters and options listed in the following table.
Feature
Patient temp. alarm
Check patient alarm disabled
Man. temp. alarm
Alarm volume
Hands free silence
Bed elevate (for Bedded Warmers
with Elevating Base)
Bed elevate (for Bedded Warmers
with Fixed-Adjustable Base,
Freestanding Warmers, and Wall
Mount Warmers)
Temp. units
Scale units
Scale resolution
Language
Low pulse rate limit*
High pulse rate limit*
Low saturation limit**
High saturation limit**
SpO alarm suspension on startup
2
SpO averaging (Masimo only)
2
SpO sensitivity (Masimo only)
2
SpO SatSeconds (Nellcor only)
2
SpO Response Mode (Nellcor only)
2
SpO Display (Nellcor only)
2
SpO View
2
Pulse tone volume, Panda
Time Format
Date Format
APGAR TONES (Giraffe Only)
* The Low pulse rate limit can be set only between 25 and the High pulse rate limit -1.
The High pulse rate limit can be set only between the Low pulse rate limit +1 and 240.
Service Manual
Available Settings US Defaults
0.5°C / 1.0°C 1.0°C
5% - 50% 25%
Off / 0.5°C / 1.0°C Off
0 / 1 / 2 / 3 3
Enable / Disable / Enable
Disengaged
Enable / Disable / Enable
Disengaged
Enable / Disable / Disengaged
Disengaged
C / C Only / F C
grams / lbs-oz / grams
grams only
10/5 grams 10 grams
Many English
25 - 110 100
111 - 240 200
20 - 99 85
86 - 100 100
0 / 15 / 30 15
2-4 / 8 / 16 8
Normal / Maximum Normal
Off, 10, 25, 50, 100 Off
Normal / Fast Normal
Pleth / Blip Pleth
Large / Normal Large
0/ 1 / 2 / 3 / 4 1
0/ 1 / 2 / 3 / 4 12
YYYY/MM/DD MM/DD/YYYY
MM/DD/YYYY
DD/MM/YYYY
ON/OFF OFF
Chapter 4: Troubleshooting
Service Mode
International Defaults
1.0°C
25%
Off
3
Enable
Enable
Disengaged
C Only
grams only
10 grams
English
100
200
85
100
15
8
Normal
Off
Normal
Pleth
Large
1
24
DD/MM/YYYY
OFF
4-3