Note 1:
Confirm that the caregiver has unobstructed access to this region during warmer operation.
Actual dimensions are facility specific and, therefore, must be determined by the facility prior to
warmer operation.
Note 2:
For repairs, the warmer needs to be removed from the wall bracket and then re-installed on the
bracket. Make sure to provide sufficient spacing in the shaded area to give the service
technician unobstructed access to the two bracket screws on each left-rear and right-rear sides
of the warmer unit.
Service Manual
FIGURE E-11. Schematic Showing Unobstructed Area Access During Use
Appendix E: Installing Wall Mount Units
Enclosure Dimensional Specification
E-15