computer radio control system
2.1 Properties
Up to 16 stabilized airplane channels.
Support for different multicopter types – from tricopters to
octocopters.
Up to 3 adjustable flight modes, options for stabilizing the
horizon and altitude.
In-flight gain tuning using free channels.
Using the latest 3-axis gyroscope and 3-axis accelerometer.
Support for LED strip consisting of WS2812 chips.
Support for external camera gimbal driven by servos.
Intelligent fail-safe.
Vibration analysis.
Full set-up options with DC/DS transmitters or via PC.
Available telemetry: Receiver voltage, signal quality, G-force,
attitude orientation.
Support of telemetry and up to 3 sensors connected directly.
2.2 Important Notices
Always use the current firmware in your DC/DS transmitter and
receiver. The minimum version of software for transmitters
supporting REX A receivers is 4.24.
Always check the polarity of the lead wires so that the voltages
on the receiver and other electronics are not reversed.
Do not expose the receiver to heat and sudden temperature
changes that may affect the accuracy of the sensors.
Never use a receiver that is visibly damaged. In particular, check
the state of the antennas regularly. In no way modify or remove
www.modellmarkt
www.modellmarkt
the receiver electronics from the supplied housing.
When installing on a combustion engine model, keep in mind
6
EN
Need help?
Do you have a question about the Duplex REX Assist Series and is the answer not in the manual?