JETI model Duplex REX Assist Series User Manual page 17

computer radio control system
9. Now check for additional features
g):
Use airspeed correction – if the
•
model is able to move at a large
range of speeds, it is advisable to
supplement it with the MSPEED
sensor or MGPS for measuring
flight speeds. By activating this
field, the receiver will take into
account the current speed while
performing stabilization.
Us e c a m e ra g i m b a l - by
•
checking, you enable the function
of an external servo control for
camera gimbal.
All servos digital - This option
•
specifies the servo output period. If all the servos are digital in
the model, the output period will be automatically set to
7.5ms. Otherwise, it will be 17.5ms.
10. Assign the individual channels for stabilization so that the
receiver learns neutral positions
and throws of individual servos
The model can now be placed
arbitrarily because at this point
you only calibrate the control
functions. Proceed step by step
according to the wizard and www.modellmarkt www.modellmarkt
calibrate only the axes that will be
f)
g)
h) .
h)
16
EN