Table of Contents
Advertisement
11. CLEANING AND MAINTENANCE
The following points have to be considered during inspection
1) All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
2) There must not be any deformations to the housing lenses rigging and installation points
(ceiling suspension trussing).
3) Motorized parts must not show any signs of wear and must move smoothly without issue.
4) The power supply cables must not show any damage material fatigue or sediment.
Further instructions depending on the installation location and usage have to be adhered to by a
qualified installer and any safety concerns have to be removed.
In order to ensure the device remains in good condition and does not fail prematurely we suggest
regular maintenance.
1) Clean the inside and outside lens each week to avoid loss of output due to accumulation of
dust/ dirt on the lens.
2) Clean the fans each week to ensure maximum airflow and efficient thermal cooling.This will
ensure the light source is operated in the best possible condition.
3) A detailed electrical check by an approved electrician every quarter to make sure that the
circuit contacts are in good condition.This will prevent poor circuit contacts and the resultant
overheating.
We recommend frequent cleaning of the device.Please use a moist lint- free cloth.Never use
alcohol or solvents.
Please refer to the instructions under"Installation instructions".
Should you need any spare parts please order genuine parts from your local dealer.
12. SERVICE
For all service needs please contact your local authorized dealer or Terbly directly. Our contact
details are:
Email:
QA@terbly.com
Phone: +86 20 3996 6388
Address: No.109 Hai Yong Road, Shi Ji Town, Pan Yu Zone Guangzhou City, China, 511450
Remark : Errors and omissions for all information given in this manual are excepted. All
information is subject to change without prior notice.
T90H-WW IP User Manual
24
XM1307-V1.0-A
Advertisement
Table of Contents
