Table of Contents
Advertisement
chooses Run For Slave 2 then it will receive the part 2's automatic program from link.
Enter the menu of 1-3 Function Mode---Set To Slave Here to set machine operate
2
which part of the program during the host-slave connection
3 Enter the menu of 1-4 1-5 Function Mode---Set To Master
4 Enter the menu of 8-1 Edit Program---Auto Program Part1.The host outputs three
groups driven program---Part1 Part2 Part3(Part1 program runs the same effect as the
host)
5 Enter the menu of 8-2 Edit Program---Edit Program.Edit the program's connection
connect the scene in order
6 The editor of the scene there are as many as 250 scenario editors and every scene can
have a program connection of 10.
Note:
Part 2 Part 3 repeat in accordance with the Part1's repeat.For example When Part 1
uses Program 2 Part 2 uses Program 4 Part 3 uses Program 6 Assume Program 2
includes scene of 10 11 12 13 Program 4 includes scene of 8 9 10 Program 6
includes scene of 12 13 14 15 Then it will run as below.
Example
10. DMX PROTOCOL
DMX channel´s functions and their values (8 DMX channels):
Mode/Channel
3CH
6CH
8CH
1
1
1
NA
NA
2
2
2
3
T90H-WW IP User Manual
Value
White LED 1 :
0-255
White ( 0-Black , 255-100% White )
White LED Fine 1 :
Fine control for White adjustment
0-255
Rotating gobo index
22
Function
XM1307-V1.0-A
Advertisement
Table of Contents
