Table of Contents
Advertisement
2. Tap the <Up/Down> button until"Set Slave"is displayed.
3. Press ENTER the display will show"Set Slave".
4. Tap the <Up/Down> button the display will show "Slave1
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.1.4. Auto Program
With this function you can run the internal program.You can select the desired program under
"Select program".You can set the number of steps under"Edit program".You can edit the
individual scenes under "Edit scenes" .With this function you can run the individual scenes either
automatically i.e.with the adjusted Step-Time.
1. Access the main menu.
2. Tap the <Up/Down> button until"Auto Program"is displayed.
3. Press ENTER, the display will show"Auto Program".
4. Tap the <Up/Down> button the display will show"Master "Alone".
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.2.
INFORMATION
9.2.1. Time info
Cur Time
With this function you can display the temporary running time of the device from the last
power on.The display shows"XXXX
counter is reset after turning the device off.
1. Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Information"is displayed. Press ENTER the display will show"Info".Tap the
<Up/Down> button until the display will show "Time Info" .Press ENTER the display
will show"Time Info".
2. Press <Up/Down> the display will show"Cur Time".
3. Press< ENTER> the display will show"Cur Time".
4. The display will show"XXXX"(Hours).
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Total Hrs
With this function you can display the running time of the device.The display shows
"XXXX
"XXXX"stands for the number of hours.
1. Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Information"is displayed.Press ENTER the display will show"Info".Tap the
<Up/Down> button until the display will show "Time Info" .Press ENTER the display
will show"Time Info".
2. Press <Up/Down> the display will show"Total Hrs".
3. Press< ENTER> the display will show"Total Hrs".
4. The display will show"XXXX"(Hours).
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Hrs
With this function you can display last the running time of the device.The display shows
T90H-WW IP User Manual
"XXXX"stands for the number of hours.The
15
"Slave2
"Slave3" .
XM1307-V1.0-A
Advertisement
Table of Contents
