Cleaning And Maintenance - Terbly LPAR7QZ User Manual

5 13
6 14
5 7 15
8 16

11. CLEANING AND MAINTENANCE

The following points have to be considered during inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
2) There must not be any deformations to the housing, lenses, rigging and installation points
(ceiling, suspension, trussing).
3) Motorized parts must not show any signs of wear and must move smoothly without issue.
4) The power supply cables must not show any damage, material fatigue or sediment.
Further instructions depending on the installation location and usage have to be adhered to by a
qualified installer and any safety concerns have to be removed.
LPAR7QZ User Manual
0-255 Dimmer 100 to 0%
strobe:
0-31 No function
16 32-127 Strobe effect slow to fast
128-190 Random strobe effect slow to fast
191-255 Pulse-effect in sequences
Dimmer intensity:
17
0-255 Intensity 0 to 100%
Fan Modes
0-20 Default to Unit Setting
21-40 Auto
18
41-60 Full
61-80 Theatre
81-255 Reserve
Color Mode:
0-189 No function
19
190-254 Edit a new white balance
255 Store a new white balance
Zoom :
20
0-255 Zoom adjustment
Reset, internal programs:
0-79 Normal
80-84 All reset
85-87 no function
88-90 no function
91-93 Store white balance enabled
94-96 no function
97-99 no function
21
100-119 Internal program 1 (secne1~8 of EEPROM)
120-139 Internal program 2 (secne9~16 of EEPROM)
140-159 Internal program 3 (secne17~24 of EEPROM)
160-179 Internal program 4 (secne25~32 of EEPROM)
180-199 Internal program 5 (secne33~40 of EEPROM)
200-219 Internal program 6 (secne41~48 of EEPROM)
220-239 Internal program 7 (secne49~56 of EEPROM)
240-255 no function
25
XM1334-V1.2-B