Terbly T90H-WW IP User Manual page 22

1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Mode Set"is displayed.Press <ENTER> the display will show"Mode Set".
2 Press <Up/Down> the display will show "User Mode".
3 Press< ENTER> the display will show"User Mode".
4 The display show"3CH
"6CH "8CH "Mode A "Mode B "Mode C".
5 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.7.2. Edit A/B/C
With this function you can adjust the rest user defined channel order.
1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Mode Set"is displayed.Press <ENTER> the display will show"Mode Set".
2 Press <Up/Down> the display will show "Edit A/B/C".
3 Press< ENTER> the display will show"Edit A/B/C".
4 The display show"Max Channel=XXX
choose"Control=XXX".
5 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.8. DIMMING
Dim Modes
With this function you can display the dimming modes.
1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Dimming"is displayed.Press <ENTER> the display will show"Dimming".
2 Press <Up/Down> the display will show "Dim Modes".
3 Press< ENTER> the display will show"Dim Modes".
4 The display show "Standar
"TV "Archite "Theatre".
5 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.9. EDIT PROG
1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
"Edit Prog" is displayed.Press ENTER the display will show"Edit Prog".
2 The display show"Sel Prog
"Edit Scen "Rec Cntrl".
3 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Run the auto program A master fixture can output to three different program signals to
the slave fixture to operate.It means the host will send cyclically in the following orders
(The host will keep operating the program of Part 1) Then the slave fixture will make
the selectively receiving according to its own set.
1 If the slave fixture chooses Run For Slave 1 from the menu of 1-3,then it will receive
the part 1's automatic program from link in the same way when the slave fixture
T90H-WW IP User Manual
Press <Up/Down> button then you can choose"3CH
Press <Up/Down> button then you can
Press <Up/Down> button then you can choose "Stage
Press <Up/Down> the display will show"Edit Prog
21
XM1307-V1.0-A