Terbly T90H-WW IP User Manual page 15

Edit A
Edit B
Edit C
DimModes
Sel Prog
EditProg
EditScen
RecCntrl
9.1. FUNCTION
9.1.1. Address
With this function you can adjust the desired DMX-address via the Display.
1. Access the main menu.
2. Tap the <Up/Down> button until"Address"is displayed.
3. Press ENTER the display will show"Address".
4. Tap the <Up/Down> button the display will show"001~XXX".
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.1.2. Value Disp
With this function you can display the DMX 512 value of each channel.The display
automatically shows the channel with a changing value.
1. Access the main menu.
2. Tap the <Up/Down> button until"Value Disp"is displayed.
3. Press ENTER the display will show"Value Disp".
4. Tap the <Up/Down> button choose each channel.
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.1.3. Set Slave
With this function, you can define the device as slave.
1. Access the main menu.
T90H-WW IP User Manual
Max CH = XXX
Control = XXX
:
Max CH = XXX
Control = XXX
:
Max CH = XXX
Control = XXX
:
Standar
Stage
TV
Archite
Theatre
ProPart1 Prog 1 ~ 10
ProPart2 Prog 1 ~ 10
ProPart3 Prog 1 ~ 10
Prog 1 ProgTest
: EdStep01
Prog 10 ~EdStep64
Auto,......
Scen001
HoldTime
~ Scen250
InByOut
XX~XX
SCxxx
S01SCxxx
S64SCxxx
Auto =xxx...
ON/OFF
14
Edit A
Edit B
Edit C
DimModes
Select programs to be run
Testing program
Program in loop
Save and exit
Save and automatically
return manual scenes edit
Automat. scenes rec
XM1307-V1.0-A