Dmx Protocol - Terbly LPAR7QZ User Manual

4. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Clr Last
With this function, you can clear last run time of the fixture. The display shows "ON" or
"OFF", Press "Enter" to confirm.
1. Access the main menu.
2. Press <Up/Down>, the display will show"Clr Last".
3. At " TimePass" menu input right password, Press< ENTER>, the display will show "Clr
Last".
4. The display show"OFF",Press <Up/Down>, the display will show"ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.8.2. TempInfo
Head Temp.
With this function you can display the temperature on the display board of the base (near
CMY-filter) in Celsius.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Head Temp.".
3. Press< ENTER>, the display will show"Head Temp.".
4. The display show "XXX
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.8.3. Soft Ver
With this function, you can display the software version of the device.
1. Access the main menu.
2. Press<Up/Down>, the display will show "Soft Ver".
3. Press< ENTER>, the display will show"Soft Ver".
4. The display show "Ver x.x.x".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

10. DMX PROTOCOL

DMX channel´s functions and their values (21 DMX channels):
Mode/Channel
5CH 8CH 16CH
1 1
2 2
3 3
4 4
1
2
LPAR7QZ User Manual
/ ".
Value
21CH
0-255
0-255
0-255
0-255
1
0-255
2
Function
Red LED -all arrays :
Red ( 0-Black , 255-100% Red )
Green LED-all arrays
Green ( 0-Black , 255-100% Green )
Blue LED -all arrays :
Blue ( 0-Black , 255-100% Blue )
White LED -all arrays :
White ( 0-Black , 255-100% White )
Red LED1 :
Red ( 0-Black , 255-100% Red )
Green LED1 :
21
:
XM1334-V1.2-B