CARDIOSTRONG TR30 Assembly And Operating Instructions Manual page 18

Step 5: Adjusting the wheels
If the ground should be uneven you can fix that by using the adjusting wheels at the mainframe
under the motor.
⚠ WARNING
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the general assembly
instructions.
1. Lift the treadmill at the front and turn
the adjusting wheels.
2. Turn the adjusting wheels clockwise to
lift the treadmill.
3. Turn the adjusting wheels counter
clockwise to lower the treadmill.
Step 6: Connecting the device to the mains supply
ड ATTENTION
The device must not be connected to a multiple socket, otherwise it cannot be guaranteed that
the device will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.
18
Down
Up
TR30