Adc34Xx Evm Connector And Jumper Locations - Texas Instruments ADC3EVM User Manual

www.ti.com
The EVM has a barrel connector for 5-V power. The SMA connectors connect the ADC input and ADC
clock input to the ADC. Typically, the ADC inputs are transformer-coupled to accept single-ended
connections. The input circuit can be configured to connect to two SMA connectors for differential
signaling, if desired.
SLAU579D – June 2014 – Revised August 2018
Submit Documentation Feedback
Figure 5. ADC34xx EVM Connector and Jumper Locations
Table 3 lists the connector information for the ADC3xxxx.
Copyright © 2014–2018, Texas Instruments Incorporated
Introduction
ADC3xxxEVM and ADC3xJxxEVM
9