Software Control; Installation Instructions; Software Operation - Texas Instruments ADC3EVM User Manual

www.ti.com
2

Software Control

2.1

Installation Instructions

1. Open the folder named ADC3xxxx_Installer_vxpx (xpx represents the latest version)
2. Run Setup.exe
3. Follow the on-screen instructions
4. Once installed, launch by clicking on the ADC3xxxx_GUI_vxpx program in Start → All Programs →
Texas Instruments ADCs
5. When plugging in the USB cable for the first time, you are prompted by the Found-New-Hardware-
Wizard to install the USB drivers.
a. When a pop-up screen opens, select Continue Downloading.
b. Follow the on-screen instructions to install the USB drivers
c. If needed, access the drivers directly in the install directory
2.2

Software Operation

The software allows programming control of the ADC3xxxx device. The front panel provides a tab for full
programming of the register map of the ADC3xxxx and an advanced tab that allows for custom register
accesses. The GUI tabs provide a convenient and simplified interface to the most used registers of each
device.
2.2.1 ADC3xxxx Control Options
The ADC3xxxx family shares some common registers. These common registers are organized within the
Common tab. Other specific device registers are in specific device tabs for the ADC3xxxx family and the
LMK04828 for the JESD204B devices. For a more detailed description of each register, see the respective
device data sheet.
SLAU579D – June 2014 – Revised August 2018
Submit Documentation Feedback
Copyright © 2014–2018, Texas Instruments Incorporated
Software Control
ADC3xxxEVM and ADC3xJxxEVM
15