Others - Chattanooga Revolution Wireless User Manual

6 6 R E V O L U T I O N W I R E L E S S ™
7 . t r O u B l e S H O O t i N G
7 .4 Ot he r s
Pr ob lem
The stimulator is not working
Po ss ible c ause
Device not answering
Low charged batteries
Bad connections
Lead wire or electrode defective
S olution
If the remote control is ON, but
does not respond to pressing the
key pad buttons:
A. Press the ON/OFF button for
2 seconds to turn the device
OFF
B. Wait 10 seconds.
C. Turn Remote Control ON
again
Ensure the remote control and
the modules are charged. When
the batteries are completely
discharged, charging for a few
minutes may be required before
the unit turns on.
A. Try to restart the remote
control and modules.
B. Place the module and the
remote control on the same
docking station in order to
pair them.
C. If, despite this, the device is
still not working, contact the
customer services that have
been stipulated and approved
by the manufacturer.
If the device is on, the intensity
bar graphs and controls are on,
and you feel no stimulation,
check and verify the connection
of the electrodes.
If the device appears to be
functioning, and there is no
stimulation, replace the lead
wires and/or electrodes.
E N