Behavior Of The Module Leds - Chattanooga Revolution Wireless User Manual

6 4 R E V O L U T I O N W I R E L E S S ™
7 . t r O u B l e S H O O t i N G
7 .2 B eha v i o r of t h e M o d u l e l e d s
Pr ob lem
The LED blinks alternately green
and red
The LED is constantly red
P os s ible c aus e
The module is out of range or is
not recognized by the Remote
Control.
Module battery level low
S olution
A. Check the remote control is
properly turned on.
B. Check that the module and
the remote control are less
than 6.5 feet away.
C. Try restarting the module.
D. Place the module and the
remote control on the same
docking station in order to
pair them.
A. Check the module is charged.
B. Try restarting the module.
C. If despite this the LED is still
red, contact the customer
services that have been
stipulated and approved by
the manufacturer.
E N