Fuji Xerox DocuPrint P505 d User Manual page 115


Community Names
 Community Name Read Only
Specify the community name to use for Read Only.
 Community Name Read/Write
Specify the community name to use for Read/Write.
Default Trap Community Name

Specify the community name to use for trap notification.

System Administrator Login ID
Specify the login ID of the system administrator.
 SNMPv3
Select this to change the settings for [SNMPv3]. This is available when HTTPS is enabled.

Enable (Read)
Select this to enable SNMPv3 read access.

Write
Select this to enable SNMPv3 write access.

System Administrator Account
 User Name
Displays the user name of the System Administrator.
 Message Digest Algorithm
Select a type of algorithm.
 Authentication Password, Retype Password
Enter a password with 8 to 32 ASCII characters.
Message Encryption Algorithm

Select a message encryption algorithm from [DES] and [AES-128].
 Encryption Password, Retype Password
Enter a password with 8 to 32 ASCII characters.

Print Drivers Account
 Message Digest Algorithm
Displays the type of algorithm.
 Message Encryption Method
Displays the message encryption algorithm: [DES] or [AES-128].
Reset to Default Password

Resets the password.
 Trap Destination
Allows you to register destinations.
Note
 In multi-interface environment, set for each interface.

Trap Destination
Select [(Available)] to register an address.
Connectivity
7
115